Forest Products

CANADIAN JOURNAL OF FOREST RESEARCH

Common integrating factor in softwood log exports from the United States
Sun, Daniels, Marcille in: Canadian Journal of Forest Research (2020), 50:5, pp 447-456

FORESTS

Evaluation of Selected Accelerated Above-Ground Durability Testing Methods for Wood after Ten Years Exposure
Singh, Page in: Forests (2020), 11:5, Article 559

Hardness of Densified Wood in Relation to Changed Chemical Composition
Mania et al. in: Forests (2020), 11:5, Article 506

Influence of Site Conditions and Quality of Birch Wood on Its Properties and Utilization after Heat Treatment. Part II—Surface Properties and Marketing Evaluation of the Effect of the Treatment on Final Usage of Such Wood
Dudik et al. in: Forests (2020), 11:5, Article 556

Mapping the Decay Hazard of Wooden Structures in Topographically Divergent Regions
Brischke, Selter in: Forests (2020), 11:5, Article 510

Numerical and Optimal Study on Bending Moment Capacity and Stiffness of Mortise-and-Tenon Joint for Wood Products
Hu, Liu in: Forests (2020), 11:5, Article 501

Preliminary Assessment of Sweet Chestnut and Mixed Sweet Chestnut-Poplar OSB
Zanuttini et al. in: Forests (2020), 11:5, Article 496

Properties of Cement-Bonded Particleboards Made from Canary Islands Palm (Phoenix canariensis Ch.) Trunks and Different Amounts of Potato Starch
Ferrandez-Villena et al. in: Forests (2020), 11:5, Article 560

Properties of Oak Roundwood with and without Frost Cracks
Mania, Tomczak in: Forests (2020), 11:5, Article 538

Representative Hardwood and Softwood Green Tissue-Microstructure Transitions per Age Group and Their Inherent Relationships with Physical–Mechanical Properties and Potential Applications
Gonzalez et al. in: Forests (2020), 11:5, Article 569

Sustainable Management of Acacia auriculiformis Plantations for Wood Production over Four Successive Rotations in South Vietnam
Huong et al. in: Forests (2020), 11:5, Article 550

Wood Protection and Preservation
Brischke in: Forests (2020), 11:5, Article 549

FRONTIERS IN FORESTS AND GLOBAL CHANGE

Managing potential conflict using participatory mapping: Collection of forest foods from timber trees around industrial concessions in Cameroon
Maukonen, Donn, Snook in: Frontiers in Forests and Global Change (2020), 3, Article 72

JOURNAL OF RURAL STUDIES

Intersecting and dynamic gender rights to néré, a food tree species in Burkina Faso
Pehou et al. in: Journal of Rural Studies (2020), 76, pp 230-239

LAND USE POLICY

Experiencing forest products – An innovation trend by rural entrepreneurs
Weiss et al. in: Land Use Policy (2020), 94, Article 104506

Governance of non-wood forest products in Russia and Ukraine: Institutional rules, stakeholder arrangements, and decision-making processes
Stryamets et al. in: Land Use Policy (2020), 94, Article 104289

WOOD SCIENCE AND TECHNOLOGY

Beech wood modification based on in situ esterification with sorbitol and citric acid
Mubarok et al. in: Wood Science and Technology (2020), 54:3, pp 479-502

Bark residues valorization potential regarding antioxidant and antimicrobial extracts
Neiva et al. in: Wood Science and Technology (2020), 54:3, pp 559-585

Comparative evaluation of the impact of extraction solvent and time on the yield and antioxidant potential of Pinus densiflora needle and bark extracts
Venkatesan, Choi, Kim in: Wood Science and Technology (2020), 54:3, pp 587-598

Comparison of single-stage and two-stage hydrothermal pretreatments for improving hemicellulose separation from bamboo chips
Ma et al. in: Wood Science and Technology (2020), 54:3, pp 547-557

Designing cricket bats using parametric modeling and genetic algorithms
Mazloomi, Saadatfar, Evans in: Wood Science and Technology (2020), 54:3, pp 755-768

Determination of fiber saturation point of rattan (Calamus simplicifolius) using the LF-NMR and two conventional methods
Yang et al. in: Wood Science and Technology (2020), 54:3, pp 667-682

Effect of DCSBD plasma treatment distance on surface characteristics of wood and thermally modified wood
Talviste et al. in: Wood Science and Technology (2020), 54:3, pp 651–665

Hydroxymethylation followed by α-bromoisobutyrylation as an effective and precise method for characterization of functional groups of hydroxymethylated lignin
Habashi, Abdollahi in: Wood Science and Technology (2020), 54:3, pp 615-636

Influence of different structural installation conditions on the progress of wear of wooden check dam elements
Akita in: Wood Science and Technology (2020), 54:3, pp 737-753

Isolation and characterization of lignocellulosic nanofibers from four kinds of organosolv-fractionated lignocellulosic materials
Wang et al. in: Wood Science and Technology (2020), 54:3, pp 503-517

Low-melting-point alloy integration into puffed wood for improving mechanical and thermal properties of wood–metal functional composites
Chai et al. in: Wood Science and Technology (2020), 54:3, pp 637-649

Prediction of mechanical properties of wood fiber insulation boards as a function of machine and process parameters by random forest
Schubert, Lukovic, Christen in: Wood Science and Technology (2020), 54:3, pp 703-713

Scratch resistance of PEG-impregnated green wood: a method for evaluation of swollen wood properties
Fortino et al. in: Wood Science and Technology (2020), 54:3, pp 715-735

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: